Interior Design

Class starts: 1/12/2013! 

Level I: Interior Design Basic, Residential Space Planning and 2D/3D Visualization.

Goal:
Residential Interior Basic. Hands On AutoCAD (2D) and Sketchup(3D) skills.
Pre Requirement: AutoCAD and Sketchup installed on personal computer.
Total Hour: 60hr

Each lesson includes 2 sections, 1 for theory, 1 for hands on lab.
Total: 30 Sections. 3hr/section.

Lesson 1
Instructor introduction.
Class Overview.
Interior Design and Permit Process.
Interior Design Related Codes and Constrains
Licensure for Interior Design
2D Drafting and 3D Modeling software Demonstration.
Human Behavior and Housing
Furniture Dimension and Clearance Requirements
An Overview of all Basic Spaces
Ergonomics and required Clearance
Organization Flow (Adjacency)
Related Codes and Constrains
Electrical and Mechanical
Lighting
Q and A
Hands On Lab:
2D Plan (AutoCAD): Furniture Plan (table, chair, couch, bed, counter, ect)
Dining Area.
3D Modeling (Sketchup):
Modeling software Introduction
Sketchup Basic
Table, Chair, Dining Area, etc.

Lesson 2
Bathroom
Introduction
Fixtures
Toilets, Urinals, Bidets, sinks(lavatories), faucets,
Bathtubs, Soaking and Whirlpool Tubs, Showers, etc.
Flow and Clearance Requirements
Related Codes and Constraints.
Q and A
Hands On Lab:
2D Plan (AutoCAD): Toilets, Urinals, Bidets, Sinks(lavatories), Faucets,Bathtubs, Soaking and Whirlpool Tubs, Showers, etc.
Bathroom Layouts.
3D Modeling (Sketchup):
Sketchup Basic
Bathroom modeling.

Lesson 3
Kitchen
Introduction
Fixtures and Appliance
Sinks, Faucets, Garbage Disposers, Dishwashers, Ranges, Countertops, Ovens, etc.
Kitchen Storage and Cabinetry.
Flow and Clearance Requirements
Related Codes and Constraints.
Q and A
Hands On Lab:
2D Plan (AutoCAD): Sinks, Faucets, Garbage Disposers, Dishwashers, Ranges, Counter tops, Ovens,
etc.
Kitchen Layouts.
3D Modeling (Sketchup):
Sketchup Basic
Kitchen 3D modeling.

Lesson 4
Bedroom (Guest vs Master), Family Room, and Leisure Space
Closet, Master bathroom Layout
Flow and Clearance Requirements
Related Codes and Constraints.
Q and A
Hands On Lab:
2D Plan (AutoCAD):
Family Room and Bedroom Layouts.
3D Modeling (Sketchup):
Sketchup Basic
Bedroom and Family Room Modeling.

Lesson 5
Home Office and Utility Room (Garage, Laundry, Gym)
Flow and Clearance Requirements
Related Codes and Constraints.
Q and A
Hands On Lab:
2D Plan (AutoCAD):
Garage, Laudry, Gym Layouts.3D Modeling (Sketchup):
Sketchup Basic
Garage, Laudry, Gym Modeling.

Lesson 6
Entry and Stairs (railing types, riser calculation, etc)
Flow and Clearance Requirements
Related Codes and Constraints.
Q and A
Hands On Lab:
2D Plan and Elevation of stairs.
Sketchup 3D Model: How to model Stairs.

Lesson 7
Doors, Windows and Hardware.
Door Types and Window Types,
Usage, Fire Rating requirements, classification.
Hands On Lab:
2D Elevation of doors and windows
Sketchup 3D Model: Different types of doors and windows.

Lesson 8
Single Family House Building Construction Basic.
Hands On Lab:
Sketchup 3D Model of a single family house.

Lesson 9
Material Finishes, Glazing, Architectural Woodwork, Decorative Metals
Hands On Lab:
2D Plan (AutoCAD): Put Building and Interior together. Adjustment of each individual space.
Sketchup 3D Model: load interior and exterior together. Presentation illustration.(3D section cut,
Perspectives, etc.)

Lesson 10
Production Drawing set Introduction
Cover sheet, site plan, floor plan, ceiling plan, finish plan, section, interior elevation, etc.
Hands On Lab:
2D Plan (AutoCAD): Site Plan
Sketchup 3D Model: Building Site Modeling. Slide show and Walk thru.
Rendering Introduction. Lighting setup. Plugin Software tryout. Photoshop(GIMP, similar to
Photoshop, but has free version) background and foreground.